Your Woovebox supports MIDI in and out over BLE, allowing it to communicate with your DAW as well as the Wooveconnect service.
To start your Woovebox with BLE enabled, keep the 1/Cd key pressed while switching on the device. The display reads 'boot bt'.
Once your device has booted up, you can proceed to pair your Woovebox with another device, and use the Wireless MIDI and data transfer capabilities.
Please remember that your Woovebox can only connect to one device at a time; if you need to connect to a device, please make sure your Woovebox is disconnected from any other device first.