- Sampler & vocoder
- Adding samples via Wooveconnect
- Levels, VU Metering & monitoring
- Sampling sounds from the audio input
- Skip-back sampling (resampling)
- Vocoder
- Working with slices
- Auto-slicing
- Real-time pitch and time warping
- Amen chop tutorial
- Multi-sampled instruments and percussion
- Using the two sample banks
- Using samples and kits in your songs
- Using single-cycle AKWF samples
- Using Amiga Tracker samples
- Using Teenage Engineering OP-1 / OP-Z sample kits
- Kit and/or master sample initialization
- Backing up sample kits
- Auto-space reclaimer
- Limitations
- Sampler & vocoder
- Using Teenage Engineering OP-1 / OP-Z sample kits
Using Teenage Engineering OP-1 / OP-Z sample kits
Your Woovebox is partially compatible with Teenage Engineering OP-1 / OP-Z sample kit (aka "drum kit") AIFF files. Such kits can be found from different sources such as the OP1.FUN website, the SoundPacks.com website and others.
It follows that your Woovebox is also compatible with the output of OP-1/OP-Z software like the OP-1 Drum Utility by Xfer Records., as well as the on-line drum patch builder at OP1.FUN.
Please note, however, that only the first sixteen samples (out of a possible 24) from a kit will be available on your Woovebox. This means that the last eight samples - if present in the kit - will not be available once uploaded to your Woovebox.
"Teenage Engineering" and "OP-1" are registered trademarks of Teenage Engineering AB, and Pocket Animal Audio is not associated with or endorsed by Teenage Engineering.
You may also be interested in...
- Char Baba - (EP) "Send Him Back to High School" (under Woovebox songs, albums and performances)
A Woovebox-only EP, with brilliant use of the Woovebox sampler, supported by its synths.
- 2/bS + value Recovery mode (under Boot modes)
To do so, hold the 2/bS key and value knob pressed in while powering up the device.
- 8. FL.En Filter End (under DJ page)
- 7. FL.St Filter Start (under DJ page)
- 3. n.V.St Noise Volume Start (under DJ page)
- Sampler & vocoder
- Adding samples via Wooveconnect
- Levels, VU Metering & monitoring
- Sampling sounds from the audio input
- Skip-back sampling (resampling)
- Vocoder
- Working with slices
- Auto-slicing
- Real-time pitch and time warping
- Amen chop tutorial
- Multi-sampled instruments and percussion
- Using the two sample banks
- Using samples and kits in your songs
- Using single-cycle AKWF samples
- Using Amiga Tracker samples
- Using Teenage Engineering OP-1 / OP-Z sample kits
- Kit and/or master sample initialization
- Backing up sample kits
- Auto-space reclaimer
- Limitations